- 6, Ganga Bhagyoday, E Ward,
Kasaba Bawada, Kolhapur - +91 9158882364
marketing@fortuneprocurators.com
Fortune Procurators is a reputed name, which is engaged in offering an extensive range of industrial abrasives media. Our products are manufactured by Global Leaders in abrasives manufacturing in compliance with international quality standards
Steel Abrasives for Cleaning, Preparing, Peening, Cutting
Steel Abrasives are steel particles that are used as abrasive or peening media. They are usually available in two different shapes that address different industrial applications.
Quenched and tempered, it is a spherical product of hypereutectoid steel (C ≥ 0,85%). Perfectly controlled heat treatments provide it with optimum resilience and resistance to fatigue. This type of shot is used in all applications where the desired effect is for mass and maximum bounce as well as for shot peening.
Shot Peening Steel shots are used in shot peening, which is used to make stronger and reduce stress in machinery like turbines, steel automobile crankshafts, springs, gears, torsion bars, shafts and connecting rods.
Surface Preparation Steel shots are used in support of coatings, such as powder coating, enameling, painting, metallization, rubber bonding and more…
Sand Removal Steel shots can be used in cleaning of castings.
Scale Removal Steel shots can also be used to clean ferrous or non-ferrous alloys or products (pipes, plates etc.) that are made from forging, die-forging, stamping, drawing and rolling or after heat treatment.
Shot Blasting of Cast Steel Steel shots can be used on the blasting of profile steel, ship board, steel board and other steel material
Roughening and de-burring Steel shots are used in the aesthetic treatment of some material. It is also used to remove the burrs that might arise during injection moulding of metallic products.
A cast steel angular grit is produced by crushing specially heat treated oversize shot pellets. It is utilised for air blast cleaning or surface preparation
Quenched and tempered, angular when new, this grit rapidly rounds off in use and is particularly suited to de-scaling applications.
Quenched and tempered, although harder than GP steel grit, GL also loses its sharp edges during shot blasting and is particularly suited to descaling and surface preparation applications.
Quenched with maximum hardness, GH always remains angular in its operating mix. These abrasives are particularly effective in surface treatment processes and produce a uniform, etched finish. For use mainly with compressed air equipment.
Steel grits WGR are special products used for the cutting of hard stone products such as granite.
Steel Grit can be used for a variety of cleaning purposes. In addition, they can also be used for
Every day, Fortune Procurators team guide each customer to find his right solution by selecting the product, technology and service dedicated to his blasting operation.
Along with supply of surface preparation abrasives viz. Steel Shots, Steel Grits, Premium Mixes, we provide technical services for process cost optimization, which directly contributes through monitory savings to our customers.
- We guide our customers for choosing steel abrasives and blasting parameters
- We audit blasting lines of our customer and propose improvement
Personalized training in blasting techniques, adapted to the customer’s application, is organized on the customer site. We help our customers to enrich the knowledge and improve the skills of their people through dedicated class room trainings.
Following GP Steel Grits, GL Steel Grits, GH Steel Grits We Supply
| Sr. No. | Type of Steel Grits | Specifications |
|---|---|---|
| 1 | Steel Grits GP 12 | Steel Grit Size 12 with Hardness 47 - 52 HRc |
| 2 | Steel Grits GP 14 | Steel Grit Size 14 with Hardness 47 - 52 HRc |
| 3 | Steel Grits GP 16 | Steel Grit Size 16 with Hardness 47 - 52 HRc |
| 4 | Steel Grits GP 18 | Steel Grit Size 18 with Hardness 47 - 52 HRc |
| 5 | Steel Grits GP 25 | Steel Grit Size 25 with Hardness 47 - 52 HRc |
| 6 | Steel Grits GP 40 | Steel Grit Size 40 with Hardness 47 - 52 HRc |
| 7 | Steel Grits GP 50 | Steel Grit Size 50 with Hardness 47 - 52 HRc |
| 8 | Steel Grits GP 80 | Steel Grit Size 80 with Hardness 47 - 52 HRc |
| 9 | Steel Grits GP 120 | Steel Grit Size 120 with Hardness 47 - 52 HRc |
| 10 | Steel Grits GL 12 | Steel Grit Size 12 with Hardness 52 - 56 HRc |
| 11 | Steel Grits GL 14 | Steel Grit Size 14 with Hardness 52 - 56 HRc |
| 12 | Steel Grits GL 16 | Steel Grit Size 16 with Hardness 52 - 56 HRc |
| 13 | Steel Grits GL 18 | Steel Grit Size 18 with Hardness 52 - 56 HRc |
| 14 | Steel Grits GL 25 | Steel Grit Size 25 with Hardness 52 - 56 HRc |
| 15 | Steel Grits GL 40 | Steel Grit Size 40 with Hardness 52 - 56 HRc |
| 16 | Steel Grits GL 50 | Steel Grit Size 50 with Hardness 52 - 56 HRc |
| 17 | Steel Grits GL 80 | Steel Grit Size 80 with Hardness 52 - 56 HRc |
| 18 | Steel Grits GL 120 | Steel Grit Size 120 with Hardness 52 - 56 HRc |
| 19 | Steel Grits GH 12 | Steel Grit Size 12 with Hardness > 60 HRc |
| 20 | Steel Grits GH 14 | Steel Grit Size 14 with Hardness > 60 HRc |
| 21 | Steel Grits GH 16 | Steel Grit Size 16 with Hardness > 60 HRc |
| 22 | Steel Grits GH 18 | Steel Grit Size 18 with Hardness > 60 HRc |
| 23 | Steel Grits GH 25 | Steel Grit Size 25 with Hardness > 60 HRc |
| 24 | Steel Grits GH 40 | Steel Grit Size 40 with Hardness > 60 HRc |
| 25 | Steel Grits GH 50 | Steel Grit Size 50 with Hardness > 60 HRc |
| 26 | Steel Grits GH 80 | Steel Grit Size 80 with Hardness > 60 HRc |
| 27 | Steel Grits GH 120 | Steel Grit Size 120 with Hardness > 60 HRc |
| Sr No | Type of Steel Shot | Specifications |
|---|---|---|
| 1 | Steel Shots S-70 | Steel Shots Size 70 with Hardness 47 - 52 HRc |
| 2 | Steel Shots S-110 | Steel Shots Size 110 with Hardness 47 - 52 HRc |
| 3 | Steel Shots S-170 | Steel Shots Size 170 with Hardness 47 - 52 HRc |
| 4 | Steel Shots S-230 | Steel Shots Size 230 with Hardness 47 - 52 HRc |
| 5 | Steel Shots S-280 | Steel Shots Size 280 with Hardness 47 - 52 HRc |
| 6 | Steel Shots S-330 | Steel Shots Size 330 with Hardness 47 - 52 HRc |
| 7 | Steel Shots S-390 | Steel Shots Size 390 with Hardness 47 - 52 HRc |
| 8 | Steel Shots S-460 | Steel Shots Size 460 with Hardness 47 - 52 HRc |
| 9 | Steel Shots S-550 | Steel Shots Size 550 with Hardness 47 - 52 HRc |
| 10 | Steel Shots S-660 | Steel Shots Size 660 with Hardness 47 - 52 HRc |
| 11 | Steel Shots S-780 | Steel Shots Size 780 with Hardness 47 - 52 HRc |
We are always happy to respond to your requests. Contact us and we’ll get back to you in the shortest time possible
