Protective Paints Suppliers |Protective Coatings Suppliers| Epoxy Paint Suppliers| Kolhapur,Satara,Mumbai, Pune, Goa, Nashik, Ahmednagar, Belgaum

Protective Paints and Coatings Suppliers

Fortune Procurators is a one of the leading Protective Paints and Protective Coatings Suppliers in Kolhapur, Satara, Mumbai, Pune, Goa, Nashik, Ahmednagar, Belgaum. We are authorized distributor of world’s best brands that include Akzo Nobel, Berger Paints, Hempel Paints, PPG Asian Paints, Wurth India

Protective coating is that layer which is applied to another material’s surface. The main aim behind this is to prevent further corrosion. There are two types of protective coating – metallic as well as for non-metallic. These paints can be applied using multiple methods. They provide many more advantages.

The three main classifications of protective coatings are:

Primers
Intermediate
Topcoats

After preparation of the metal surface, first, it is necessary to apply a primer coat onto the steel surface. Then thickness is added by applying a primer coat. The function of the topcoat is to offer aesthetic value as well as protection from UV rays.

Four types of protective coatings for metal are:

- Inhibitive: These coatings consist of chemicals that help to prevent corrosion. The reaction takes place with anode, cathode, electrolyte, oxygen, acid etc.

- Barrier: It offers protection from oxygen, water, electrolyte etc.

- Combination: It is a combination of different types of protective coatings.

- Sacrificial: It offers galvanic protection. Corrosion takes place on them. So the underlying metal stays protected.

Categories of Protective Coatings:

- Epoxy : 2 component primers, finish coats, intermediate coats in the desired BS or RAL or IS shades (Zinc phosphate, Zinc Rich, Surface Tolerant, Epoxy phenolic, High Build MIO)

- Alkyd : Finish coats and single component primer in BS or desired RAL or IS shades.

- Polysiloxane : 2 component Finish Paints in desired BS or RAL or IS shades with high-quality colour retention and gloss.

- Polyurethane : 2 components primer and finish coats in desired IS, RAL or BS shades

- Corrosion under Insulation : This is beneficial for uninsulated surfaces or thermally insulated surfaces. These are also helpful in protecting cryogenic piping and equipment.

- Intumescent Coating : Borate and chlorine-free, single component and water-borne intumescent coating are advantageous in case of onsite application to structural steel.